EVOFLEX™ WITH ARMORGRIP™ SEAMLESS EQUINE FLOORING
Evoflex™ with Armorgrip™ is a “Mark II“ development of the original Evoflex™ Seamless Polyurethane Flooring System – the new system is also a tough, comfortable, slip resistant hygienic floor. It bears the same unique benefits as its cousin: the floor is totally seamless and impermeable allowing the floor to kept clean and germ free.
Evoflex™ with Armorgrip™ has been specifically developed with the following improvements in mind:
[1] the desire for a softer surface – we have increased the thickness of the system to 20 mm and introduced a thick but sturdy rubber-foam base mat to provide for more comfort and resilience
[2] the need for a more anti-slip surface – the surface is coated with Armorgrip™ which is a powerful, long lasting and user-friendly floor coating that offers excellent slip and fall protection while at the same time protecting the overall surface from damage. The Armorgrip™ coating contains specially treated rubber granules [which create the structured finish] that are made from recycled rubber. Armorgrip™ ™ is waterproof, resilient and UV resistant.
[3] the need for a more installer friendly surface. The Evoflex™ base mat is supplied in 0.5 m x 1.0 m panels with the point-load-bearing fabric reinforcing layer already fused on. Panels are easier to install than rolls and there is less wastage. The Armorgrip™ coating a 1-component moisture cured material that can easily installed by roller, brush or hopper spray-gun.
You can view a video of a typical stable installation on this by scrolling down to the bottom of this page. The site was a mock up of a 10' x 10' stable box.
EVOFLEX™ WITH ARMORGRIP™ SEAMLESS EQUINE FLOORING
A cushioned flooring that is totally seamless and therefore hygienic. The system is long lasting, repairable, re-coatible and has low maintenance.
AREAS OF APPLICATION
Stables - Trailers - Walkways - Ramps - Wash Areas - Clinics - Tack up Areas
Armorgrip™ is a powerful, long lasting and user-friendly floor coating that offers excellent slip and fall protection while at the same time protecting the overall surface from damage. The Armorgrip™ coating contains specially treated rubber granules [which create the structured finish] that are made from recycled rubber. Armorgrip™ bonds to wood, metal, concrete and to itself, making it easily repairable if necessary. Armorgrip™ ™ is waterproof, resilient and UV resistant. Suitable also for use as a non-slip coating in factories, warehouses, garages, hangars, landing pads, bed liners and marine decks.
SPECIFICATIONS - EVOFLEX™ WITH ARMORGRIP™ SEAMLESS EQUINE FLOORING
Total Thickness | 20 mm |
|
|
Adhesive | 2-component, solvent free polyurethane |
|
|
Base Mat |
|
Size | 0.5 m x 1.0 m rubber/foam panel |
| with Fabric Reinforcing |
Density | ± 580 kg/m3 [36.8 lbs/cu ft] |
Force Reduction | 55% ± 5% |
Elongation at Break | 95% ± 5% |
Tear Strength | 6.00 N/mm [6.12 kg/cm] |
Tensile Strength | 1.10 N/mm2 [11.22 kg/cm2] |
|
|
Armorgrip™ Coating |
|
Solids | 100% |
Colors | Red/Brown; Moss Green; Telegray |
Tensile Strength | 6.674 N/mm2 [968 psi] |
Die C Tear Strength | 17.34 N/mm [99 pli] |
Abrasion Resistance | 0.361 grams |
| [Taber Wheel, 1000 gr. load, 1,000 cycles] |